This is the ReadyLift 1.5" Front Leveling Kit for the new 4th Gen Toyota Tacoma. This leveling kit is a great option to get a Level stance on your 2024+ Toyota Tacoma while retaining the factory smooth ride. This kit allows you to run 34" Tires.
- Easy Bolt On Installation
- Rig Position: Front
- Lift Height: 1.5"
- Increased Ground Clearance
- Maintains Factory Ride Quality
- Levels the front of the Tacoma with teh rear
- No Strut disassembly or strut compressors required for installation.
- The no-trim maximum tire size for this kit is a 285/70R17 with a 17x 8 wheel and +35 offset.
Tire Fitment
Wheel Tire Note
Stock (17x7 +60) 285/70R17 No Trim (Widest tire you can put on, Knuckle clearance)
17x8 +35 285/70R17 No Trim
17x8 +35 285/75R17 No Trim under normal driving conditions (8mm clearance). Will hit fender at full bump.
17x8.5 +47 285/70R17 No Trim
17x8.5 +47 285/75R17 No Trim under normal driving conditions. Will hit fender at full bump.
17x8.5 +25 285/70R17 No Trim
17x9 +1 285/70R17 May require trimming. (4mm clearance)
Tire Size Comparison:
18x8 +35 285/65R18 No Trim
18x8 +35 285/70R18 No Trim under normal driving conditions. Will hit fender at full bump.
18x8.5 +47 285/65R18 No Trim
18x8.5 +47 285/70R18 No Trim under normal driving conditions. Will hit fender at full bump.
18x8.5 +25 285/65R18 No Trim
18x9 +1 285/65R18 May require trimming. (4mm clearance)
20x8.5 +35 295/55R20 No Trim
20x9 +18 295/55R20 No Trim
20x9 +1 295/55R20 May require trimming. (4mm clearance)
Install Guide
Download Install Instructions: Download
