Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280754. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2022-2025 Toyota Tundra 3.4L & 2023-2024 Toyota Sequoia 3.4L. MagnaFlow 280754 includes (1) Ring Gasket, (1) Donut Gasket, (2) Nuts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
MagnaFlow OEM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California, Colorado or New York.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
Keep the check engine light off with the MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280754. Designed for select 2022–2025 Toyota Tundra models with the 3.4L engine and 2023–2024 Toyota Sequoia models with the 3.4L engine, this replacement converter replicates the original equipment design for dependable fitment, smooth exhaust flow, and reliable emissions performance. It is intended for OBDII vehicles equipped with California or Federal/EPA emissions systems, but it is not legal for sale or installation in California, Colorado, or New York. Verify vehicle application and emissions configuration before ordering.
MagnaFlow uses advanced 3D scanning and metrology during development to help ensure OE-like fit and function. The direct-fit design supports installation with proper tools and requires no cutting or welding. Free-flowing mandrel-bent tubing preserves factory-style geometry, while the compact, low-mass construction promotes efficient heat management. A single laser fusion weld helps reduce the potential for exhaust leaks, and the included hardware simplifies replacement during installation.
The converter is built with high-strength 16-gauge 409 stainless steel tubing for corrosion resistance and extended service life. OE-sized barbed exhaust hangers are made from corrosion-resistant 410 stainless steel to help reduce exhaust noise and vibration, while durable 308 stainless steel MIG welds provide lasting structural strength. MagnaFlow Part Number 280754 includes one ring gasket, one donut gasket, and two nuts for a more convenient installation. This EPA-compliant catalytic converter is engineered to meet or exceed applicable Federal emissions requirements and restore factory-like exhaust system operation.
Features:
- EPA-compliant catalytic converter designed for vehicles with Federal/EPA emissions systems
- Direct-fit design installs without cutting or welding when using the proper tools
- Fits select 2022–2025 Toyota Tundra and 2023–2024 Toyota Sequoia models with the 3.4L engine
- Mandrel-bent tubing maintains OE-like geometry for smooth exhaust flow and efficient engine operation
- High-strength 16-gauge 409 stainless steel tubing provides corrosion resistance and durability
- OE-sized 410 stainless steel barbed hangers help reduce exhaust noise and vibration
- Compact, low-mass construction supports efficient thermal performance
- Single laser fusion weld helps reduce the potential for exhaust leaks
- Durable 308 stainless steel MIG welds provide lasting strength
- Includes one ring gasket, one donut gasket, and two nuts
- Not legal for sale or installation in California, Colorado, or New York
Fitment:
Toyota Sequoia Capstone 2023
Toyota Sequoia Capstone 2024
Toyota Sequoia Limited 2023
Toyota Sequoia Limited 2024
Toyota Sequoia Platinum 2023
Toyota Sequoia Platinum 2024
Toyota Sequoia SR5 2023
Toyota Sequoia SR5 2024
Toyota Sequoia TRD Pro 2023
Toyota Sequoia TRD Pro 2024
Toyota Tundra 1794 Edition 2022
Toyota Tundra 1794 Edition 2023
Toyota Tundra 1794 Edition 2024
Toyota Tundra 1794 Edition 2025
Toyota Tundra Capstone 2022
Toyota Tundra Capstone 2023
Toyota Tundra Capstone 2024
Toyota Tundra Capstone 2025
Toyota Tundra Limited 2022
Toyota Tundra Limited 2023
Toyota Tundra Limited 2024
Toyota Tundra Limited 2025
Toyota Tundra Platinum 2022
Toyota Tundra Platinum 2023
Toyota Tundra Platinum 2024
Toyota Tundra Platinum 2025
Toyota Tundra SR 2022
Toyota Tundra SR 2023
Toyota Tundra SR 2024
Toyota Tundra SR 2025
Toyota Tundra SR5 2022
Toyota Tundra SR5 2023
Toyota Tundra SR5 2024
Toyota Tundra SR5 2025
Toyota Tundra TRD Pro 2022
Toyota Tundra TRD Pro 2023
Toyota Tundra TRD Pro 2024
Toyota Tundra TRD Pro 2025
