AWE Touring Edition Exhaust w/ Diamond Black Tips | 2023+ Toyota GR Corolla

Improve the performance and sound of your Toyota GR Corolla with this Touring Edition Catback Exhaust from AWE Tuning. The touring edition exhaust will provide your GRC with an aggressive tone from idle to full throttle with everything in between. 

• Bolt On Installation
• Touring Edition Exhaust
• Three Diamond Black Tips
• Single 3" to Triple 2.5" Catback Design
• 3 Inlet to facilitate 3" connections with aftermarket downpipes
• Dyno-proved max gains of 3hop and 1 lb-ft of torque at the wheels
• Tailored tri-merge design ensures and even flow
• Clean, non-baffled straight through design maximizes performance
• Handcrafted from 3" U.S Sourced CNC Mandrel-bent 0.65"-wall T304L stainless Steel
• Proudly Engineered, designed and manufactured in-house in the USA
• Perfect Fitment Guaranteed
• NO Check Engine LIght Guarantee
• Lifetime Manufacturer Warranty

Exhaust Sound Videos

Single 3” to triple 2.5” design:

Touring and Track Editions feature a 3” inlet of the mid-pipe to accommodate further modification upstream without disruption. Thanks to the stamped stainless merge in the rear, the transition from single 3” to triple 2.5” flows fluidly through each outlet.

Bullets in the back:

Each exhaust features a mix of bespoke straight-through bullet-style resonators in the rear to provide an aggressive tone while parenting rasp.

Tailored tips:

One bespoke 4.5" x 8" oval double-walled, slash-cut tip in the center flanked by two 5” double-walled, slash-cut tips in diamond black. These are the best-looking aftermarket tips available for the GRC.

Conversion kits:

AWE makes it easy to convert existing Track Editions into Touring Editions, or vice versa, if you decide at a later date to turn your interior volume up or down. Please note: both the Touring and Track Editions are aggressive, and the difference lies in a fine threshold of intense frequencies produced by the 1.6L at highway cruising speeds.

Nope, they’re not valved:

During R&D, AWE conducted a (quite painstaking) full evaluation of the factory valve and its behavior under various driving conditions to determine its reason for existing. The valve is not controllable by the driver whatsoever–meaning regardless of the driving mode, buttons, settings, etc, there’s no opening/closing the valve from within the cabin. It works directly off of throttle input and only opens upon a certain breach of a threshold declared by the ECU very low in the rev range. Its sole purpose is for backpressure, and considering the factory exhaust design, flow is given priority to the center outlet (the larger one). The factory rear muffler is baffled with no packing material and only directs flow to the left and right exits when cruising at light throttle inputs.

After confirming this, and given our configurations already remove any backpressure issues organically, it would have been pointless to incorporate a valve. 

Power to the pavement:

Dyno-verified gains of +3 hp and +1 lb-ft of torque at the wheels on an otherwise stock vehicle. 

100% emission-friendly:

Touring and Track Editions do not interfere with any factory emissions equipment.

Weights:

Track Edition: 28.5 lbs | Touring Edition: 37.5 lbs | stock exhaust: 33 lbs

AWE uses T304L stainless steel with a wall thickness of .065". The overall weights of each system are directly reflective of the material used, the increase in diameter throughout the exhaust, and the increase in component content.

Made in PA, USA:

Engineered, designed, and manufactured in-house at AWE using US-sourced .065”-wall T304L stainless steel to achieve a tone deeper than everyone else.

The fine print:

AWE’s Perfect Fitment Guarantee, No CEL Guarantee, and Lifetime Warranty all come standard.